Buy Single Point Battery Watering Systems

Single Point Battery

Watering Systems

Extend the life of your marine flooded lead acid batteries by installing a single point battery watering system. Mount the quick connect fill tube in an easily accessed and convenient location. All cells of all batteries in your machinery space can be connected to a single point watering source. The vent cap floats ensure your batteries are topped up but not overfilled. It is safe, quick and easy to install and maintain all battery electrolyte levels. We offer QWIK-FILL from Flowrite and AquaPro from Rover & Rover. The AquaPro 1/4 turn bayonet fill caps even have an access port for a hydrometer with a 3 mm fill tube permitting the taking of specific gravity measurements without having to remove the fill caps.

^#1 cause

of battery failure...

Neglected Watering

AquaPro^®

Single Point Watering System

þ Extended Battery Life

þ Improved Performance

þ Increased Efficiency

þ Prevents Acid Damage

þ Convenience

þ Cost Savings

þ Safety

AquaPro now offer a central de-gas system that will water the batteries and vent hydrogen outside through flame arrestors.

Tubing, tees, tube ring clamps and end stoppers also sold separately. Call for details.

Contact us for other battery types, we have a vast number of float designs to suit most battery configurations worldwide. Other water delivery systems are available including gravity and AC or DC electric pumps and tanks. Replacement parts such as caps, rubber washers and floats are sold separately as well. Please call us for details or to locate an AquaPro marine dealer near you.

All prices are given in $CDN.

Canadian Residents add 5% GST

Except Residents in ON, NF, NB & NS Add 13% in lieu of GST and in BC 12% in lieu of GST.

FOB Ottawa, ON.

Last updated 2010-08-27

Typical Float Match by Battery Type

1/4 Turn Fill Cap:

· #256 (clear) for T-1275,

· #260 (yellow) for T-105, Exide, US Battery, Interstate & Crown, and

· #262 for T-1260, T-1275 Plus, T-105 Plus, T-145 Plus.

AquaPro^®Single Point Watering System

The AquaPro system is easy to install, simply exchange the standard battery vent caps with the AquaPro fill caps, connect them with PVC tubing and attach the quick coupler. Most batteries found in North America are ¼ turn Bayonet or ¾” push in however fill caps are available for many other international battery types as illustrated below.